Two component road marking machine is an advanced marking method. Two components marking paint consists of cold plastic paint and curing agent. The two liquids are contained in separate tanks until they are sprayed and confluence in the air during marking operation. After cold plastic paint and curing agent are mixed in the air, they immediately form the marking lines on the road because the curing agent helps speed up the solidification of paint. The marking width can be controlled by adjusting the angle of sprayers.
Specification:
| Model | RS-12 |
| Size | 2000×250×1250 mm |
| Weight | 210kg |
| Marking Width | 50-500 mm |
| Working Pressure | 10-15 mpa |
| Max Flow Rate | 9L/min |
Our Stock:
-
- Hydraulic pumps
-
- Spray guns
Hydraulic pumps: There are two pumps: one for two component paint and the other for curing agent.
Spray guns: There are two spray guns, with one spraying cold plastic paint and another curing agent. The height and distance of spray guns can be adjusted to mark lines in different width and spacing
