BASIC INFO
Pendulum Type Abrasion Resistance Tester is a specialized instrument used to assess the abrasion resistance of road marking materials (like paints, thermoplastic markings, etc.). It operates using a pendulum motion to simulate friction or wear conditions, allowing for an accurate measure of how well a material can withstand mechanical abrasion over time.
Specifications:
| Pendulum mass: | 1500±30g |
| Pendulum center of gravity distance: | 410±5mm |
| Positive static pressure of the rubber sheet on the road surface: | 2500g |
| The number of times the pendulum can be freely lowered from an inclination of 5 degrees until it stops swinging should be no less than 70 times. | |
| The distance between the swing center of the outer edge of the rubber sheet is 510mm. | |
| The total weight of the instrument is about 14Kg. | |
Initial anti-skid performance of road marking
| Type | Slip resistance value (BPN) |
|---|---|
| Ordinary anti-slip type | ≥45 |
| High anti-slip type | ≥55 |
| Note: The anti-slip value is the surface anti-slip ability measured by a pendulum friction coefficient tester. The unit is British Pendulum (tester) Number, referred to as BPN. | |
Contact Us for a Free Quote
Fill The Form Below, and our sales representatives will be in touch with you shortly.
