-
Posted: 2013/05/08 | Categories: FAQ
Steps:
1. Using arrow mold, place the mold in correct place and start marking.
2. Measure and dimension the arrow, marking based on the marks.
3. Using road marking tapes.
...
-
Posted: 2012/06/04 | Categories: FAQ
OPeration Video
Steps:
1. Measure the spacing between two zebra crossing and mark the position.
2. Paste tapes at the edge of the zebra crossing.
3. Using thermoplastic marking machine with 400mm ...
-
Posted: 2011/04/06 | Categories: FAQ
Yes. The optional width of die shoes ranges from 50mm to 550mm. The sizes of dispensers are matched with die shoes of certain specification.
...
-
Posted: 2011/04/06 | Categories: FAQ
The capacity and size of paint tank can be customized according to customers’ requirements, ranging from 100kg to 150kg.
...
-
Posted: 2011/04/06 | Categories: FAQ
Yes. You can change the thickness of the markings lines by adjusting the height of die shoes or adjust the position of rear blade, the common thickness range from 1mm to 6mm.
...
-
Posted: 2011/04/06 | Categories: FAQ
The marking machine is fueled by gas.
...
-
Posted: 2011/04/06 | Categories: FAQ
Yes. Thermoplastic road marking machine can be equipped with two line marking die shoes, which can draw two lines at the same time.
...
-
Posted: 2011/04/06 | Categories: FAQ
Normally, storage time of thermoplastic paint is 1 year in dry and well ventilated condition. It is not suitable for long-term storage.
...
-
Posted: 2011/03/06 | Categories: FAQ
For thermoplastic road marking machine: one die shoe and matching dispenser.
For convex line marking machine: electromagnetic valve and controller
For cold paint road marking machine: Gasket
For therm ...
-
Posted: 2011/03/06 | Categories: FAQ
Since wider marking lines require bigger die shoes, using double handle dies can save lots of labor.
...
